HAIBOXING HBX 16889A Pro Upgrade Parts
Are there any players out there who know about upgrade parts for the HBX 16889A RC car?
Recently, HAIBOXING has released the upgrade parts for HBX 16889A RC car, which is to fulfill the requirements for the modified HBX 16889A.
If you want to know about hbx 16889a upgrade parts, please click the following website:
HBX 16889A Pro Upgrades, HAIBOXING 16889 16889A Upgrade Parts
I also received the upgrade parts for HBX 16889A RC car just recently, and I am very happy because I think my HBX 16889A RC car is saved. I bought the HBX 16889A for its looks at the beginning and found it very nice and sophisticated, but the original parts are very fragile, so I always change the parts and it’s not a pleasure to play with it.
I’m going to introduce you to the upgraded accessories for the HBX 16889A RC car.
Rear wheel holders are what support the wheels and allow them to be steered while traveling. Original rear wheel cups are usually made of plastic. And the rear wheel cup, which drives and supports the steering of the vehicle, is likely to break easily under too much violent play.
Why take metal material to make the rear wheel Holder?
Upgraded rear wheel cups are usually made of metal and are better able to withstand the stress and wear and tear of rough play, thus extending the life of your RC car.
How many colors are there for the rear axle cups?
Two in total, blue and red.
The connecting rod is an important part of the suspension system of HBX 16889A RC car, it connects the wheels to the body and is responsible for transmitting the up and down movement of the wheels and supporting the weight of the body.
Since the connecting rod supports the weight of the whole car, it will be better if it needs a harder and stronger material. Therefore, many players want to buy HBX 16889A RC car connecting rod upgrades in order to better protect the safety of the RC car.
A good quality connecting rod can not only reduce the friction and resistance of the suspension system, but also improve the stability of the suspension system.
How do I upgrade the connecting rod on my HBX 16889A RC car?
First of all, players have to choose the upgrade connecting rod for HBX 16889A RC car first, it must be matched with HBX 16889A.
Secondly, prepare some basic tools. For example: screwdriver, wrench, pliers and so on.
Third, you need to remove some other parts (such as wheels, suspension arms, etc.) before removing the original connecting rod. Be careful during the disassembly process to avoid damaging other parts.
Fourth, install the new connecting rod to the RC car’s suspension system and make sure it is firmly fixed in place. During the installation process, it may be necessary to adjust some parameters (e.g. length, angle of the connecting rod, etc.) to ensure that the performance of the RC car’s suspension system is optimized. It is also necessary to check that the clearance between the connecting rod and the body and wheels is appropriate to avoid interference or friction during driving.
Fifth, after installing the new linkage, the RC car needs to be tested to ensure that it performs properly.
Are there any considerations when installing the HBX 16889A RC car?
Compatibility: Make sure the selected connecting rod is compatible with the rest of the RC car.
Safety: Ensure your safety during the upgrade process. Avoid using inappropriate tools or methods that may cause injury or damage to the RC car. Also, be careful during disassembly and installation to avoid damaging other parts.
- Metal Swing Arm
HBX 16889A RC car has two pairs of swing arms, one pair is front swing arm and one pair is rear swing arm. Then the swing arms are actually very important for the stability and maneuverability of the RC car.
As an experienced player, the first thing I did when I bought the RC car was to replace it with a metal swing arm.
Then there will be new players do not understand, why to replace the original parts with metal parts? The answer has the following two points:
- Enhanced durability: metal is more resistant to wear and tear, which can effectively extend the service life of the swing arm and reduce the frequency of repair and replacement.
- Improve the overall performance: After upgrading the metal swing arm, the performance of the vehicle’s suspension system will also be improved, thus further improving the overall performance of the vehicle.
A new player will next ask the question, does it have to be an aluminum alloy and not something else?
Some swing arms on the market are made of steel, but while steel can withstand greater impacts, it is relatively heavy and will affect the lightweight design of the vehicle.
Aluminum is just right, not as durable as steel swing arms, but lighter and helps improve the handling of the vehicle.
So all in all, it’s the aluminum alloy upgrades that are more cost-effective.
How to maintain and care the upgraded parts of front lower swing arm of HBX 16889A RC car in daily life?
Regular Inspection: players should regularly check the aluminum front lower swing arm for any obvious signs of rust or looseness. If any problems are found, they should be dealt with promptly.
Replacement and Repair: If the aluminum alloy front lower swing arm is seriously damaged or has failed to function, users should consider replacing it with a new one. For slightly damaged swing arms, repair can be attempted, but it should be ensured that the repaired swing arm can meet the usage requirements.
How to install the front upper swing arm of HBX 16889A RC car?
Preparation Stage: Make sure the vehicle is in a stable condition and turn off the power. Prepare tools such as screwdrivers and wrenches and check the integrity of the new swing arm.
Disassemble the Old Parts: Use the tools to disassemble the connecting parts of the old swing arm, such as bolts and nuts, and then take off the old swing arm.
Install the New Swing Arm: Align the new swing arm to the position, fix it with screws and make sure it is stable and not loose.
Check and Test: After installation, check whether the swing arm is installed correctly, and then test the vehicle to make sure it runs smoothly.
How many colors of rear drop arms are available for the HBX 16889A RC car?
There is a total of blue and red. Players are free to choose their favorite color.
Front steering cup upgrade kit for HAIBOXING HBX 16889A RC car is made of aluminum alloy, which has higher strength and resistance and can provide better steering and handling stability.
How do I install the upgrade kit for the front steering cup on the HAIBOXING HBX 16889 RC car?
Disassemble the old steering cup: Use appropriate tools to disassemble the old steering cup from the frame and steering knuckle.
Install the new steering cup: Align the new steering cup to the position, fix it with screws and make sure it is firm without loosening.
Check and adjust: After installation, check whether the steering cup is installed correctly and adjust the vehicle to ensure that the steering is flexible and stable.
So new players will think whether it is necessary to replace an RC car with a whole set of upgrade accessories?
I think the replacement of upgrade parts will enhance the performance of HAIBOXING HBX 16889 RC car to some extent. For example, the upgraded metal fittings can reduce the deformation of the fittings, thus improving the steering precision and handling performance.