Activity

When the range of the RC car is significantly shortened, or when the power is rapidly depleted after charging, it may be necessary to consider replacing the battery.

I am a regular buyer from this store below because of its good service and after sales. And the price is also very fair. So I recommend it to everyone.

HAIBOXING 2193 RC Car Parts, HBX 2193 Parts

When the wheels are severely worn, deformed or cracked, the handling and stability of the vehicle will be affected and need to be replaced promptly.

ESC overheating may be caused by excessive motor load, poor heat dissipation, battery voltage mismatch, or internal ESC failure.

When the swing arm shows serious wear, deformation or breakage, it needs to be replaced in time to ensure the normal operation of the vehicle suspension system.

Avoid overcharging and overdischarging, maintain proper storage temperature, and balance charging regularly to extend battery life.

The main function of the shock absorber is to absorb and disperse the vibration generated in the process of vehicle driving, to improve the stability of vehicle handling and ride comfort.

Remote control car servo through receiving remote control signals, converted into electrical signals, processed by the circuit board to control the motor rotation, to achieve the servo rotation.

First, locate the adjustment screw or knob on the shock, which is usually located on the top or side of the shock.
Then, use an adjustment tool or wrench to gently turn the adjustment screw or knob to increase or decrease the stiffness and damping of the shock.
During the adjustment process, you can gradually make fine adjustments and test the…[Read more]

Are there any upgrade parts for HBX 2193 RC car?

I always buy from this store because this store has all good after sales, good service and fair price.

If yo u want to have a look,please click the following website:

HAIBOXING 2193 RC Car Parts, HBX 2193 Parts

First, keep the shock absorber clean to avoid dust and dirt from entering the inside of the shock absorber and affecting its performance.
Secondly, regularly check whether the shock absorbers are firmly mounted to ensure that they will not loosen or fall off during driving.
In addition, avoid driving for a long time under poor road conditions to…[Read more]

If the charging speed is slow, it may be because the charger is underpowered or the charging cable is of poor quality.
You can try to replace the charger with a higher power one and make sure that the charging cable is up to standard and of reliable quality.

The ESC of HBX 901A RC car is making abnormal sound, do I need to replace it?

Is the HBX T10 RC car able to be fitted with a roll cage?

Avoid using hard or sharp tools to clean up as this may damage the heatsink.
If the dirt on the heatsink is difficult to clean, you can use a small amount of alcohol or a special cleaner, but make sure that the cleaner will not corrode the heatsink or leave a residue.
After cleaning, wipe with a dry cloth to ensure the surface of the heatsink is…[Read more]

Maintaining and servicing the heatsink of your RC car mainly involves cleaning dust and dirt regularly, as well as inspecting the heatsink for deformation or damage.
Dust and dirt will prevent heat from escaping, so the surface of the heatsink should be cleaned regularly with tools such as a soft brush or hair dryer.

This can be related to wheel balancing issues, suspension failures, handling issues, etc.

Clean, lubricate and inspect. Clean dust from the motor housing and heat sink regularly to maintain good heat dissipation.
Lubricate the bearings and transmission parts with appropriate lubricants to minimize friction and wear.

If the charger is not working properly, first check that the charging cable and charger connector are connected tightly and that there is no dirt or damage.
Next, check that the charger is plugged into the correct power outlet and make sure that the supply voltage matches the charger’s requirements.